Description 640V-ST/-STP
The SenS camera platform is unique in performance vs. standard SWIR InGaAs cameras. This SenS sensor supports dual light response modes: linear response for low light sensitivity (two software selectable gains) and wide dynamic range (WDR) when light levels are higher. No other SWIR camera provides such superb image quality over a wide range of light conditions.
The USB3 version of the SenS comes in two configurations:
640V-ST- The standard TE cooled model with USB3 data port
640V-STP- Same as 640V-ST with the addition of fast 100 nsec. gated image acquisition mode
Main Features
+TE Cooled
+USB3 (power and control)
+VGA InGaAs sensor (640X512, 15 um)
+900-1700 nm spectral response
+Snapshot shutter
+250 fps
+Free GUI SDK, tools for Matlab and MicroManager
+Dual sensor response (linear and wide dynamic range)
+100 nsec. Gating mode for 640V-STP model
NON-ITAR SWIR Camera
Specifications
| Resolution | 640(H)x512(V) |
| Interface | USB 3.0 |
| Sensor format | 1 inch |
| Pixel pitch | 15µm |
| Mode | Global shutter Dual mode: Log or CTIA Reading: ITR or IWR Option: CDS (only in CTIA) |
| Partial reading mode | Possible to integer just a part of the sensor (ROI) and display only this window on the video output. This option allows a frame rate increase on the ROI |
| Cooling capacity | ΔT = 30°C |
| TEC
|
3 modes
|
| Exposure time range |
10 usec. to 2 sec for 640V-ST 100 nsec. to 2 sec. for 640V-STP |
| Spectral response | 0.9 to 1.7um |
| Dynamic range
|
120dB typical in Log
63dB typical in CTIA (Low Gain) 49dB typical in CTIA (High Gain) |
| Full well capacity (in CTIA)
|
>17ke- (High Gain)
>380ke- (Low Gain) |
| ADC | 14 bits |
| Sensor Noise
|
45 e- (with CDS)
|
| Frame rate | Up to 230fps full frame |
| Trigger | IN/OUT (LVTTL), Selectable delay |
| Consumption
|
Camera consumption (standard mode) < 2.5W
TEC comsumption < 4W |
| Power Range | 5V (USB) |
| Dimension | 46x46x57mm |
| Mount | C-Mount native |
| Weight | < 215g |
| Temperature Range | 0°C to +65°C |