Integrating spheres are used for reflectance spectroscopy and irradiance measurements.
The light collected by the integrating sphere can be used as a diffuse illumination or measurement source. The basic principle is that light enters the sphere through the sample port, goes through multiple reflections on the highly reflective, Lambertian surface of the sphere and is scattered uniformly around the interior of the sphere. Behind a baffled port inside the sphere which is independent of the angular properties of the sample port, a fiber-optic cable collects a homogenized light signal and carries it to the spectrometer. The baffle is very significant as it prevents first reflections from entering the detection fiber.
The integrating spheres are available with active diameters of 30, 50 and 80 mm and an SMA port at 90 degrees for collecting the irradiance and reflection signals. The reflection spheres feature an additional SMA-connector port at 8 degrees from normal (from sample port) for direct illumination. This port couples external light into the sphere through a fiber-optic cable connected to a COL-UV/VIS collimating lens. The sample port diameters are 6 mm for the 30-IRRAD and 30-REFL, 10 mm for the 50-IRRAD/REFL and 15 mm for the 80-IRRAD/REFL
All sample ports are knife-edge, ensuring a near 180 degree field of view of the sample port. The irradiance version of the integrating sphere can be used for measurements of light sources, such as lasers, LEDs and incandenscent sources. For irradiance measurements of 5 mm cylindrical LEDs, a special adapter is available for the 50/80-IRRAD. This adapter ensures correct and reproducible positioning of the LEDs inside the sphere.
The reflection version is used for the measurement of total integrated reflectance of a surface, as well as for color measurements and fluorescence spectroscopy on solids/powders. The principle of measurement is based on direct illumination and indirect reflection. The 50-LS-HAL with internal light source can be a used as a low-cost uniform source and is available with an intensity calibration file.
The inside of the integrating spheres is made of a highly reflective diffuse PTFE material. This provides over 96% reflectance over a wide wavelength range of 250-2500 nm. For the 50-REFL a special black gloss-trap is available to exclude specular reflection in the measurement. Please order this option when ordering the sphere. In case specular reflection needs to be included, a white reflective part, which is standard on all 50-REFL, can be mounted in the position of the gloss-trap.